How Many Bags Of Shock Do I Need For My Pool?

Do I need to shock a new pool?

When opening your pool in the spring – When a pool is first opened, the chlorine level normally needs an immediate boost, and shock is the quickest and easiest way to accomplish this.

If the chlorine level is already adquate, a non-chlorine shock may be used to treat the water..

How many bags of shock do I need to open my pool?

Shock The Pool to Remove Bacteria and Contaminants To shock your pool, use 2 pounds of shock for every 10,000 gallons of water, which should raise your chlorine to 10.0 ppm.

Does shock raise pH?

Chlorine based pool shock (Calcium Hypochlorite) has a high pH, and will naturally raise the pH level of your swimming pool water, in addition to changing your chlorine level. Chlorine free shock has a neutral pH, and will not affect any of your pool chemical levels.

How can I make my green pool clear faster?

How to Get Rid of Green Algae in a PoolRemove Debris and Brush the Pool.Test the Water.Balance the Pool Chemistry.Treat the Water with Shock.Vacuum and Run the Filter After.Deep Clean Your Filter.Overnight Chlorine Loss Test (OCLT)Why is My Pool Water Still Green After Shocking?More items…•

Why is my pool still green after shock and algaecide?

If you do receive a higher reading this simply means your water is alkaline and may potentially turn cloudier than normal after the chemically shocking your pool. You simply need to introduce hydrochloric acid to the water as this acid neutralises basic elements. Don’t worry if you’ve accidentally added too much.

What order do I add chemicals to my pool?

Chemicals that affect the levels of pH and alkalinity need to be added to the swimming pool first. Getting the pH and total alkalinity sorted out will allow for the addition of further chemicals that affect the hardness and cleanliness of the water.

How many bags of shock do I need for a green pool?

Green or Dark Green Pool Water: Triple shocking requires 3 pounds for every 10,000 gallons of pool water.

How long after adding algaecide can you shock?

Alkalinity Balance, pH up, pH down, Calcium Balance, Water Stabilizer, and clarifier are all swim-safe chemicals. Wait about 20 minutes, and you are free to swim. We suggest adding algaecide, Super Erace, and shock at night, after everyone is out of the pool.

What is the fastest way to clean a green pool?

One fast way to turn your pool water green is by accidentally adding chlorine to a pool with bromine. You are suppose to shock bromine pools with chlorine, just make sure not to mix the two chemicals, and do not add to much chlorine. Usually the green will go away fast if you do not add to much chlorine.

How much shock Do you need to open an inground pool?

We recommend double shocking at pool opening. To double shock, you’ll use two pounds of chlorine shock (for chlorine systems) per 10,000 gallons of water. Before you add chlorine to your pool, you’ll want to don your safety goggles and chemical-resistant gloves.

How long does it take pool shock to work?

Follow package instructions, which will guide you in how long to wait after shocking before swimming. Heavy shocking with granular chlorine will generally require 24-48 hours before the chlorine level has dropped to safe swimming levels (below 5 ppm).

Can you put too much shock in a pool?

You can, however, use more shock than you need – or less than is sufficient. In other words, while you shouldn’t worry too much about adding a little extra pool shock, there is still a right way and a wrong way to shock your pool if you want to get the best results.

Is it OK to add shock and algaecide at the same time?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

Can you shock a pool two days in a row?

Will the children swim again? Here’s the deal. It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

How much shock Do I need to raise free chlorine?

As a rule, you will need to raise free chlorine to 10 times your combined chlorine to hit what is known as “break point.” Therefore, it is good to deal with combined chlorine while it is still small.

What time of day is best to shock a pool?

eveningBEST TIME OF DAY TO SHOCK? After you have cleaned the pool of all debris it is best to shock in the evening because the sun’s UV rays will dissolve the chlorine too quickly before it has a chance to attach and oxidize.

Do I use shock or algaecide first?

Algaecide should be used after each shock treatment, so it has a better chance to support your chlorine as it works its magic. Be sure to shock your pool first, then when the chlorine levels of your pool return to normal, add the correct amount of algaecide to several places around your pool while your pump is running.